|
 |
|
 |
 Daeyoon Scale Industrial Co.,Ltd.
|
 |
Scale Products - Digital Hygro-Thermo Meter (DHT-1) |
|
|
|
|
Product Description
+This Meter determines and displays exactly the Humidity,Temperature,Timer and Clock of the current indoor/outdoor simultaneously.
Product Feature
-Extra large LCD display
-Outdoor temperature probe (removeable)
-Displays ºC or ºF (by switch at back)
-Automatic recording of Min.and Max. readings of temperature and humidity
-Countdown timer with alarm
-24 hour format clock with alarm
-Flip out desk stand or wall mount
-Robust ABS plastic case / Low battery warning
-Dimensions 150mm x 100mm x 23mm
-6 Months Warranty / Will ship worldwide
< FUNCTIONS >
-Temperature indoors & Outdoors
-Humidity indoors
-Min and max recording
-Clock and alarm / Countdown timer
Product Specification / Models
-Temperature range indoors -30 - 50ºC (-22 - 122ºF )
-Temperature range outdoors -50 - 70ºC (-58 - 158ºF )
-Temperature resolution 0.1ºC
-Temperature accuracy ±1ºC
-Humidity range 20-95% RH
-Humidity resolution 1%
-Humidity accuracy ± 5%
-Powered by 1 x AAA battery (supplied)
Application
+This is a full function hygrothermometer. These are not your usual el-cheapo device, they are stylish and
functional quality units.
Other Information
< OPERATION MANUAL >
1. Installing and Replacing the battery :
This Meter requires one‘AAA’battery (1.5V)
To install or replace the battery:
1>Open the battery cover, below the stand.
2>Insert the battery
3>Replace the battery cover
*Low battery Warning: This warning icon will appear on the LCD screen when the main unit battery is low and need replacing.
* When the power is off, Time/Temp,Hum/Max,Min will be resetted.
2. Temperature Setting : This unit will measure the Indoor/Outdoor Temp.
*°C/°F Exchange : The temp will be displayed in °C or °F unit. The unit can be selected by switching the °C/°F slide switch at the back of the unit.
3. In/Out, Max/Min Setting :
*In/Out display shows indoor Temp(with In icon) or outdoor Temp(with Out icon) selected by the In/Out key.
*Maximum/Minimum : The user can view the maximum and minimum Temp./Humidity records by pressing‘Max/Min’key.
Press the key once again,it will return to the normal situation.
The Max/Min recorded Temperature and Humidity readings will automatically be stored in the memory.
4. Manually setting the Clock :
1>Press「MODE」three more seconds until the Hour display begin to flash
2>Press「SET」until the Hour is set.
3>Repeat press「MODE」and the Minutes begin to flash
4>Press「SET」until the Minutes is set.
5>When the last setting has been made, Repeat press「MODE」to exit and return to the normal time display mode.
5. Manually setting the Clock Alarm :
1>Press「MODE」and a ‘Alarm’ signal will be displayed on the LCD.
2>From the next steps are same as above [4.setting the Clock 1>∼4>]
3>When the last setting has been made, Repeat press「MODE」and then will be
disappeared ‘Alarm’ signal or will automatically return to the normal time display mode.
4>The alarm will automatically activate itself for 1 minute unless disabled
5>Press「MODE」to momentarily stop the alarm
6. Manually setting the Timer: 「Timer」mode
1>Press「Timer」mode ‘M-SET’> Repeat press ‘M-SET’ until M setting ‘S-SET’> Repeat press ‘S-SET’ until S setting
2>Holding down key for 3 Sec., setting will be changed to 00:00.
3>In state of inputted Min/Sec at timer, press key for count start and press the key once again for stopping.
4>After count is completed, you hear the Alarm, then press key to stop.
( The data value will be displayed as before)
7. Use of the Flip-Out Stand :
- Flip-out the plastic stand on the rear of the unit for table standing. Stand the unit on a flat surface.
-Wall-Mounting the unit:
1.Drive a screw the wall
2.Locate into the hanger slot on the back of the unit until it locks into place
8. Warranty : This product is warranted to be free of manufacturing defects for a period of 90 days from date of retail purchase. Defective product should be returned to the place of retail purchase.
This warranty does not cover product subjected to tampering,misuse, abuse or accidental damage.
|
| Payment |
Delivery |
Origin |
| By L/C or T/T |
Within 15-20 days after your order |
R.O.K |
| Minimum Order |
Packaging |
Inspection |
| None Specified |
Each set Each individual gift hard box |
None Specified |
| Samples |
Sample Price |
| Charge |
None Specified
|
| Company Name: |
Daeyoon Scale Industrial Co., Ltd.
|
| Contact Person: |
M.J,KIM
(Your message will be sent to the supplier directly) |
| Address: |
#207 Ace Techno Tower(II), 197-7,Guro-Dong,,
Guro-Gu,,
Seoul, Korea (South) |
| Zip: |
152-848 |
| Telephone: |
82-2-858-6870
|
| Fax: |
82-2-866-9422 |
| Web Site: |
http://chloride.en.ecplaza.net |
|
|
|
|
Home
Click to enlarge image